Kord Industrial, Inc.

CUSTOM HOSE ASSEMBLIES
FLUID CONNECTOR SPECIALISTS

| Home      | Contact      | Site Map

Ryco Suction SR image
Ryco Suction SR



>> Products  >> Ryco Suction SR

SUCTION
SR

Meets or exceeds the performance requirements of
SAE 100R4 (except SR48), AS 3791 100R4.
Approvals: Det Norske Veritas (DNV), American Bureau of Shipping (ABS), Lloyd’s Register (LR), Marine Equipment Directive (MED) approval when used with RYCO FS1072.
Germanischer Lloyd (GL) Type Approval pending.


Recommended For:
Petroleum and water base hydraulic fluids in suction lines or in low pressure return lines.


Tube:
Black, oil resistant synthetic rubber. (Nitrile).

Reinforcement:
Textile reinforcement with spiral wire to prevent collapsing.

Cover:
Black, oil and abrasion resistant synthetic rubber.

Temperature Range:
From -40°C to +100°C (-40°F to +212°F)

Working Pressure:
Dynamic working pressures (in systems with pressure surges
or variable loads) are based on 4:1 minimum burst to
working pressure safety factor.

Couplings:

Working pressure shown is for hose performance capabilities.
Performance of a hose assembly depends on couplings used.

1. For Suction Applications, and Low Pressure Delivery (up to 25% of Max. Working Pressure). 3300 SERIES COUPLINGS WITH RSC CLAMP 3300 Series (sizes 3/4? to 2.1/2?) click to view 3300 Series Couplings require a suitable clamp around the outside of the hose.

2. For Suction Applications, and High Pressure Delivery (up to 100% of Max. Working Pressure).

BITELOK NON-SKIVE ONE PIECE CRIMP T400 Series (sizes 3/4? to 2?)

Hose Working Pressures 1 BAR = 14.5 PSI 1 MPA = 10 BAR
PART NO HOSE SIZE ID MAX. DYNAMIC
WORKING PRESSURE
MAXIMUM
WORKING PRESSURE
MIN.
BURST PRESSURE
VACUUM
RATING
MIN.
BEND
RADIUS
AV.
WEIGHT
NOMINAL
HOSE
OD
DN INCH DASH BAR PSI BAR PSI BAR PSI MM/HG IN/HG MM KGS/M MM
SR12 19 3/4 -12 0 0 21 300 84 1200 635 25 125 0,82 31,5
SR16 25 1 -16 0 0 17 250 68 1000 635 25 150 1,00 40,0
SR20 31 1.1/4 -20 0 0 14 200 56 800 635 25 200 1,19 46,5
SR24 38 1.1/2 -24 0 0 10 150 40 600 635 25 250 1,39 53,1
SR32 51 2 -32 0 0 7 100 28 400 635 25 300 1,94 65,5
SR40 63 2.1/2 -40 0 0 4,3 62 17 250 635 25 350 2,37 78,5
SR48 75 3 -48 0 0 3,9 56 16 225 635 25 450 2,45 90,7



Hose Dimensions Matched Couplings
PART NO MINIMUM
BEND RADIUS
AVERAGE
WEIGHT
NOMINAL
HOSE OD
BITELOK
ONE PIECE CRIMP
PUSH ON
MM KGS/M MM NON-SKIVE
SR12 125 0,82 31,5 T400 3300
SR16 150 1,00 40,0 T400 3300
SR20 200 1,19 46,5 T400 3300
SR24 250 1,39 53,1 T400 3300
SR32 300 1,94 65,5 T400 3300
SR40 350 2,37 78,5 3300
SR48 450 2,45 90,7 3300

*Due to the manufacturing tolerance on outside diameter of the hose and the range of adjustment of the clamp, it is necessary to confirm correct clamp at time of assembly.