Kord Industrial, Inc.

CUSTOM HOSE ASSEMBLIES
FLUID CONNECTOR SPECIALISTS

| Home      | Contact      | Site Map

Ryco Spiral HSHA image
Ryco Spiral HSHA



>> Products  >> Ryco Spiral HSHA

SPIRAL
HSHA

HSHA Series meets or exceeds the performance requirements of EN 856 Type 4SH.
Approvals: Det Norske Veritas (DNV), American Bureau of Shipping (ABS), Lloyd’s Register (LR), Marine Equipment Directive (MED). Germanischer Lloyd (GL) Type Approval pending.

Recommended For:
Extra high pressure hydraulic oil lines.

Tube:
Black, oil resistant synthetic rubber. (Neoprene).

Reinforcement:
Four layers of alternated, spiralled high tensile steel wire.

Cover:
Black, oil and abrasion resistant synthetic rubber. Highly visible layline branding for easy and permanent identification.

Temperature Range:
From -40°C to +100°C (-40°F to +212°F).

Working Pressure:
Dynamic working pressures (in systems with pressure surges or variable loads) are based on 4:1 minimum burst to working pressure safety factor. Static working pressures (in systems with constant loads without pressure spikes) are based on 3:1 minimum burst to working pressure safety factor.

Flame Resistance:
Meets Flame Resistant Designation “U.S. MSHA" of the US Department of Labor, Mine Safety and Health Administration. Complies with Flame Resistant requirements of Australian Standard AS 2660 and Method of Test AS 1180. 10B. MED Certified.

Couplings:
BITELOK ONE PIECE CRIMP
See chart below.

Hose Working Pressures 1 BAR = 14.5 PSI 1 MPA = 10 BAR
PART NO HOSE SIZE ID MAX. DYNAMIC
WORKING PRESSURE
MAX. STATIC
WORKING PRESSURE
MIN.
BURST PRESSURE
DN INCH DASH BAR PSI BAR PSI BAR PSI
HSH12A 19 3/4 -12 435 6300 580 8400 1740 25200
HSH16A 25 1 -16 420 6000 560 8000 1680 24000
HSH20A 31 1.1/4 -20 350 5100 467 6800 1400 20400
HSH24A 38 1.1/2 -24 290 4200 387 5610 1160 16820
HSH32A 51 2 -32 275 4000 367 5330 1100 16000



Hose Dimensions Matched Couplings
PART NO MINIMUM
BEND RADIUS
AVERAGE
WEIGHT
NOMINAL
HOSE OD
BITELOK
ONE PIECE CRIMP
MM INCH KGS/M LBS/FT MM INCH NON-SKIVE
HSH12A 280 11.0 1,60 1.08 31,7 1.25 T900
HSH16A 340 13.5 2,06 1.38 38,2 1.50 T900
HSH20A 460 18.0 2,57 1.73 45,2 1.78 T700
HSH24A 560 22.0 3,42 2.30 53,5 2.11 T700
HSH32A 600 24.0 4,50 3.02 68,0 2.68 T700