Kord Industrial, Inc.

CUSTOM HOSE ASSEMBLIES
FLUID CONNECTOR SPECIALISTS

| Home      | Contact      | Site Map

Ryco DINFLEX DF2A image
Ryco DINFLEX DF2A


DINFLEX Hose has the compact outside diameter of one wire braid hose, but exceeds the performance requirements of SAE 100R2 two wire braid hose. Additionally it has a smaller bend radius and higher flexibility than standard one wire braid hoses.

>> Products  >> Ryco DINFLEX DF2A

DINFLEX
DF2A

Meets or exceeds the performance requirements of
SAE 100R2AT, SAE 100R16, AS 3791 100R2AT, EN 857 Type 2SC, ISO 1436.
Approvals: Det Norske Veritas (DNV), American Bureau of Shipping (ABS), Lloyd’s Register (LR), Marine Equipment Directive (MED). Germanischer Lloyd (GL) Type Approval pending.


Recommended For:
High pressure hydraulic oil lines. DINFLEX Hose has the
compact outside diameter of one wire braid hose, but
exceeds the performance requirements of SAE 100R2 two
wire braid hose.
Additionally it has a smaller bend radius and higher
flexibility than standard one wire braid hoses.
Not suitable for use with Field Attachable Couplings.

Tube:
Black, oil resistant synthetic rubber. (Nitrile).

Reinforcement:
Two braids of high tensile steel wire.

Cover:
Black, oil and abrasion resistant synthetic rubber. No skiving
required with Bitelok T200 & T700 Series Crimp Couplings.
Not suitable for use with Field Attachable Couplings.

Temperature Range:
From -40°C to +100°C (-40°F to +212°F).

Working Pressure:
Dynamic working pressures (in systems with pressure surges
or variable loads) are based on 4:1 minimum burst to
working pressure safety factor.
Static working pressures (in systems with constant loads
without pressure spikes) are based on 3:1 minimum burst
to working pressure safety factor.

Flame Resistance:
Complies with Flame Resistant requirements of Australian
Standard AS 2660 and Method of Test AS 1180.10B.
Meets Flame Resistant Designation “U.S. MSHA? of the US
Department of Labor, Mine Safety and Health Administration.
MED Certified.

Couplings:
BITELOK NON-SKIVE ONE PIECE CRIMP
T200 Series (sizes 1/4? to 3/4?)
T700 Series (sizes 3/8? to 3/4?)

Not suitable for use with Field Attachable Couplings.

Hose Working Pressures 1 BAR = 14.5 PSI 1 MPA = 10 BAR
PART NO HOSE SIZE ID MAX. DYNAMIC
WORKING PRESSURE
MAX. STATIC
WORKING PRESSURE
MIN.
BURST PRESSURE
DN INCH DASH BAR PSI BAR PSI BAR PSI
DF24A 6 1/4 -04 420 6000 560 8000 1680 24000
DF26A 10 3/8 -06 350 5100 467 6800 1400 20400
DF28A 13 1/2 -08 295 4250 393 5670 1180 17000
DF212A 19 3/4 -12 215 3100 287 4130 860 12400



Hose Dimensions Matched Couplings
PART NO MINIMUM
BEND RADIUS
AVERAGE
WEIGHT
NOMINAL
HOSE OD
BITELOK
ONE PIECE CRIMP
MM INCH KGS/M LBS/FT MM INCH NON-SKIVE
DF24A 50 2.0 0,27 0.18 13,6 0.54 T200
DF26A 63 2.5 0,37 0.25 17,6 0.69 T200 T700
DF28A 88 3.5 0,46 0.31 20,5 0.81 T200 T700
DF212A 120 4.8 0,78 0.52 27,7 1.09 T200 T700