Kord Industrial, Inc.

CUSTOM HOSE ASSEMBLIES
FLUID CONNECTOR SPECIALISTS

| Home      | Contact      | Site Map

Ryco Avenger T2A image
Ryco Avenger T2A



>> Products  >> Ryco Avenger T2A

AVENGER
T2A

Meets or exceeds the performance requirements of SAE 100R2AT, AS 3791 100R2AT,
DIN 20022-2SN, EN 853 Type 2SN, ISO 1436 Type 2AT.
Approvals: Det Norske Veritas (DNV), American Bureau of Shipping (ABS), Lloyd’s Register (LR), Marine Equipment Directive (MED). Germanischer Lloyd (GL) Type Approval pending.
US Coast Guard – SAE J1942-1 Type Approval for Hydraulic Systems.


Recommended For:
High pressure hydraulic oil lines.

Tube
Black, oil resistant synthetic rubber. (Nitrile).

Reinforcement
Two braids of high tensile steel wire.

Cover
Black, oil and abrasion resistant synthetic rubber.
No skiving required with Bitelok T200 & T700 Series Crimp
Couplings and L Series Field Attachable Couplings.


Temperature Range
From -40°C to +100°C (-40°F to +212°F).

Working Pressure
Dynamic working pressures (in systems with pressure surges
or variable loads) are based on 4:1 minimum burst to
working pressure safety factor.
Static working pressures (in systems with constant loads
without pressure spikes) are based on 3:1 minimum burst
to working pressure safety factor.

Flame Resistance
All sizes meet Flame Resistant
Designation “U.S. MSHA? of the US Department of Labor,
Mine Safety and Health Administration. MED Certified.


Couplings
BITELOK NON-SKIVE ONE PIECE CRIMP
T200 Series (sizes 1/4? to 1.1/4?)
T700 Series (sizes 3/8? to 2?)

FIELD ATTACHABLE
L Series (sizes 1/4? to 1.1/4?)
B Series (sizes 1.1/2? and 2?)

TWO PIECE SKIVE
1200 Series (size 2.1/2?)

Hose Working Pressures 1 BAR = 14.5 PSI 1 MPA = 10 BAR
PART NO HOSE SIZE ID MAX. DYNAMIC
WORKING PRESSURE
MAX. STATIC
WORKING PRESSURE
MIN.
BURST PRESSURE
DN INCH DASH BAR PSI BAR PSI BAR PSI
T24A 6 1/4 -04 420 6000 560 8000 1680 24000
T26A 10 3/8 -06 350 5100 467 6800 1400 20400
T28A 13 1/2 -08 345 5000 460 6670 1380 20000
T210A 16 5/8 -10 250 3600 333 4830 1000 14500
T212A 19 3/4 -12 215 3100 287 4130 860 12400
T216A 25 1 -16 167 2400 223 3200 670 9600
T220A 31 1.1/4 -20 125 1800 167 2400 500 7200
T224A 38 1.1/2 -24 90 1300 120 1730 360 5200
T232A 51 2 -32 80 1150 107 1530 320 4600
T240A 63 2.1/2 -40 69 1000 92 1330 276 4000



Hose Dimensions Matched Couplings
PART NO MINIMUM
BEND RADIUS
AVERAGE
WEIGHT
NOMINAL
HOSE OD
FIELD ATTACHABLE
L (&B) SERIES
BITELOK
ONE PIECE CRIMP
MM INCH KGS/M LBS/FT MM INCH INSERT FERRULE NON-SKIVE
T24A 100 4.0 0,39 0.26 15,0 0.59 600 SERIES L00-04 T200
T26A 127 5.0 0,56 0.38 19,0 0.75 600 SERIES L00-06 T200 T700
T28A 178 7.0 0,66 0.44 22,0 0.87 600 SERIES L00-08 T200 T700
T210A 200 8.0 0,80 0.54 25,2 0.99 600 SERIES L00-10 T200 T700
T212A 240 9.5 0,96 0.65 29,1 1.15 600 SERIES L00-12 T200 T700
T216A 300 12.0 1,37 0.92 37,7 1.48 600 SERIES L00-16 T200 T700
T220A 419 16.5 2,03 1.36 48,0 1.89 600 SERIES L00-20 T200 T700
T224A 500 20.0 2,75 1.85 54,4 2.14 600 SERIES B00-24 T700
T232A 600 24.0 3,48 2.34 67,3 2.65 600 SERIES B00-32 T700
T240A 760 30.0 3,70 2.49 78,6 3.09 1200-40 TWO PIECE

*When using B Series Field Attachable Couplings on T2A Series Hose, cover of hose must be skived at ends.
Refer to AS2D Series Hose for B Series Skive Length.